CSA
101/I.S.2/A440- 05
|
Standard/Specification for windows, doors, and unit skylights-First Edition;
AAMA/WDMA
|
CSA
A123.1-05/A123.5- 05
|
Asphalt Shingles Made from Organic Felt and Surfaced with Mineral Granules/
Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules-Second
Edition
|
CSA A123.17-
05
|
Asphalt glass felt used in roofing and waterproofing-Second Edition
|
CSA
A123.2- 03
|
Asphalt-coated roofing sheets
|
CSA A123.3-98-
CAN/CSA
|
Asphalt Saturated Organic Roofing Felt-Third Edition;
|
CSA A123.4- 04
|
Asphalt for constructing built-up roof coverings and waterproofing systems-Third
Edition
|
CSA
A123.51-M85- CAN3
|
Asphalt Shingle Application on Roof Slopes 1:3 and Steeper-General Instruction
No 1-2
|
CSA
A123.52-M85- CAN3
|
Asphalt Shingle Application on Roof Slopes 1:6 to Less Than 1:3- General
Instruction No 1-2
|
CSA A14-00-
CAN/CSA
|
Concrete Poles-Seventh Edition; General Instruction No 1; Update No 2
|
CSA A220
SERIES-M91- CAN/CSA
|
Concrete Roof Tiles-First Edition; General Instruction No 1- 2
|
CSA
A23.1-04/A23.2-04- CAN/CSA
|
Concrete Materials and Methods of Concrete Construction/ Methods of Test and
Standard Practices for Concrete-Tenth Edition; Update No 1
|
CSA A23.3- 04
|
Design of concrete structures-Fifth edition; Update No.1
|
CSA A231.1- 99
|
Precast Concrete Paving Slabs-General Instruction No 1-2
|
CSA A231.2- 95
|
Precast Concrete Pavers-Second Edition; General Instruction No 1
|
CSA A257
SERIES- 03
|
Standards for Concrete Pipe and Manhole Sections-Fourth Edition; Update No 1
|
CSA A277-01-
CAN/CSA
|
Procedure for Certification of Factory-Built Houses-Fourth Edition; General
Instruction No 1; Update No 2
|
CSA A283- 00
|
Qualification Code for Concrete Testing Laboratories-Third Edition; General
Instruction No.1
|
CSA A3000
SERIES- 03
|
Cementitious Materials Compendium-Second Edition; Update No 1; Update No 2;
Update No 3
|
CSA A324-M88-
CAN/CSA
|
Clay Flue Liners-First Edition; General Instruction No 1
|
CSA
A344.1/A344.2- 05
|
User guide for steel storage racks/Standard for the design and construction of
steel storage racks-First Edition
|
CSA
A369.1-M90- CAN/CSA
|
Method of Test for Compressive Strength of Masonry Prisms- Second Edition;
General Instruction No 1
|
CSA A438- 00
|
Concrete Construction for Housing and Small Buildings-Third Edition; General
Instruction No 1; Update No 2
|
CSA
A440.2/A440.3- 04
|
Energy Performance of Windows and Other Fenestration Systems/ User guide to CSA
A440.2-04, Energy performance of windows and other fenestration systems- Update
No 1
|
CSA A440.4- 98
|
Window and Door Installation-First Edition; General Instruction No 1
|
CSA
A440-00/A440.1- 00-CAN/CSA
|
Windows / User Selection Guide to CSA Standard A440-00- Fourth Edition; General
Instruction No 1; Update No. 2
|
CSA
A450.1-M86- CAN3
|
Ceramic Wall Tile Adhesives (Organic)-First Edition; General Instruction No 1
|
CSA
A451.1-M86- CAN3
|
Polystyrene Insulation Adhesives-First Edition; General Instruction No 1
|
CSA A453- 95
|
Energy Performance Evaluation of Swinging Doors-General Instruction No 1
|
CSA A82.1-M87-
CAN/CSA
|
Burned Clay Brick (Solid Masonry Units Made from Clay or Shale)-Second Edition;
General Instruction No 1
|
CSA A82.2-M78-
CAN3
|
Methods of Sampling and Testing Brick
|
CSA A82.8-M78-
CAN3
|
Hollow Clay Brick-First Edition: General Instruction No. 1
|
CSA A864- 00
|
Guide to the Evaluation and Management of Concrete Structures Affected by
Alkali-Aggregate Reaction-First Edition; General Instruction No.1
|
CSA A93-M82-
CAN3
|
Natural Airflow Ventilators for Buildings-Third Edition; General Instruction No
1
|
CSA B111- 1974
|
Wire Nails, Spikes and Staples-General Instruction No 1
|
CSA B125.1- 05
|
Plumbing supply fittings-ASME A112.18.1
|
CSA B125.2- 05
|
Plumbing waste fittings-ASME A112.18.2-2005
|
CSA B125.3- 05
|
Plumbing fittings
|
CSA B127.1-
1999
|
Asbestos Cement Drain, Waste, and Vent Pipe and Pipe Fittings-Third Edition;
General Instruction No.1; Update No 2
|
CSA B1800- 02
|
Plastic Nonpressure Pipe Compendium-Update No. 1-4; Supplement 1:2005
|
CSA B196.3-
M1983
|
PVC Underground Telecommunication Cable Ducting and Fittings- Second Edition;
General Instruction No 1
|
CSA B242- 05
|
Groove- and shoulder-type mechanical pipe couplings
|
CSA B272- 93
|
Prefabricated Self-Sealing Roof Vent Flashings-General Instruction No 1
|
CSA B356- 00
|
Water Pressure Reducing Valves for Domestic Water Supply Systems- Second
Edition; General Instruction No. 1; Update No. 2; Update No. 3
|
CSA B45
SERIES- 02
|
Plumbing Fixtures-Fifth Edition; Update No 1-2; Supplement No. 1: 10/2004;
Update No 3
|
CSA B45.10-01-
CAN/CSA
|
Hydromassage Bathtubs-First Edition; General Insruction No. 1; Update No. 2
|
CSA B602- 05
|
Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe- Fourth
Edition
|
CSA B64
SERIES-01- CAN/CSA
|
Backflow Preventers and Vacuum Breakers-Fourth Edition; General Instruction No
1; Update No 2; Update No 3; Update No 4
|
CSA
B64.10-01/B64.10.1- 01
|
Manual for the Selection and Installation of Backflow Prevention Devices/Manual
for the Maintenance and Field Testing of Backflow Prevention Devices-Fourth
Edition; General Instruction No. 1; Update No. 2; Supplement No. 1; Update No.
3
|
CSA B66- 05
|
Design, material, and manufacturing requirements for prefabricated septic tanks
and sewage holding tanks
|
CSA B70.1- 03
|
Frames and Covers for Maintenance Holes and Catchbasins-First Edition; Update No
2
|
CSA B70- 02
|
Cast Iron Soil Pipe, Fittings, and Means of Joining-Ninth Edition; Update No. 1;
Update No. 2
|
CSA B79- 05
|
Floor drains, area drains, shower drains, and cleanouts in residential
construction
|
CSA DIR.004-
99
|
List of CSA Certified Plumbing Products
|
CSA DIR.007-
1996
|
List of CSA Certified Precast Concrete Manufacturers
|
CSA DIR.011-
1996
|
List of CSA Certified Concrete Testing Laboratories
|
CSA
E60974-5-03- CAN/CSA
|
Arc welding equipment - Part 5: Wire feeders-First Edition
|
CSA
E60974-7-02- CAN/CSA
|
Arc Welding Equipment - Part 7: Torches-First Edition; CEI/IEC 60974-7: 2000
|
CSA G162.1-
M1977
|
Methods of Determining Mass of Coating on Zinc-Coated (Galvanized) Steel Wire
|
CSA G164-M92-
CAN/CSA
|
Hot Dip Galvanizing of Irregularly Shaped Articles Metals and Metal
Products-General Instruction No 1-2
|
CSA G189- 1966
|
Sprayed Metal Coatings for Atmospheric Corrosion Protection-General Instruction
No 1
|
CSA
G30.18-M92- CAN/CSA
|
Billet-Steel Bars for Concrete Reinforcement Metals and Metal Products-General
Instruction No 1-2
|
CSA G312.1-75-
CAN3
|
Preferred Metric Dimensions for Flat Metal Products
|
CSA
G312.2-M76- CAN3
|
Preferred Metric Dimensions for Round, Square, Rectangular and Hexagonal Metal
Products
|
CSA
G40.20-04/G40.21- 04
|
General requirements for rolled or welded structural quality steel/ Structural
quality steel-Sixth Edition
|
CSA G40.23-94-
CAN/CSA
|
Steel - Surface Finish of Hot-Rolled Plates and Wide Flats - Delivery
Requirements-General Instruction No 1
|
CSA G401- 01
|
Corrugated Steel Pipe Products-Third Edition; General Instruction No 1
|
CSA M15078-03-
CAN/CSA
|
Machinery for forestry Log loaders Location and method of operation of two-lever
operator controls-First Edition
|
CSA O112
SERIES- M1977
|
CSA Standards for Wood Adhesives-First Edition
|
CSA O112.9-
040
|
Evaluation of adhesives for structural wood products (exterior exposure)- First
Edition
|
CSA O115-
M1982
|
Hardwood and Decorative Plywood-General Instruction No 1
|
CSA O116- 1969
|
Power and Communication Sawn Wood Crossarms-General Instruction No 1
|
CSA O118.1- 97
|
Western Red Cedars Shakes and Shingles-Fifth Edition; General Instruction No 1
|
CSA O118.2-
1981
|
Eastern White Cedar Shingles-General Instruction No 1
|
CSA O118.2-
M1981
|
Eastern White Cedar Shingles-General Instruction No 1
|
CSA O118.3- 93
|
Northern Pine Tapersawn Shakes-General Instruction No 1; Update No. 2
|
CSA O121-
M1978
|
Douglas Fir Plywood-General Instruction No 1; Erratum: September 1978; Amendment
1-3: August 1981
|
CSA O141- 05
|
Softwood Lumber
|
CSA O15- 05
|
Wood Utility Poles and Reinforcing Stubs-Third Edition
|
CSA O151- 04
|
Canadian Softwood Plywood-Third Edition
|
CSA O153-
M1980
|
Poplar Plywood-General Instruction No 1
|
CSA
O302.1/O302.2- 00
|
Scaling Roundwood / Measurement of Woodchips, Tree Residues, and
Byproducts-General Instruction No 1, Third Edition
|
CSA O322- 02
|
Procedure for Certification of Pressure-Treated Wood Materials for Use in
Preserved Wood Foundations-Second Edition
|
CSA O325.0-92-
CAN/CSA
|
Construction Sheathing-Second Edition; General Instruction No 1
|
CSA O325.1-88-
CAN/CSA
|
Test Methods for Construction Sheathing-General Instruction No 1-2; Supplement
1: 1992
|
CSA O437
SERIES- 93
|
Standards on OSB and Waferboard-Second Edition; General Instruction No 1
|
CSA O452
SERIES- 94
|
Design Rated OSB-First Edition; General Instruction No 1
|
CSA O56- 1962
|
Round Timber Piles-Revision 1-2; July 1967
|
CSA O56-M79-
CAN3
|
Round Wood Piles-First Edition; General Instruction No. 1
|
CSA O80
SERIES- 97
|
Wood Preservation-Ninth Edition; General Instruction No 1-4; Supplement 1:1999;
Supplement 2:2005
|
CSA O86- 01
|
Engineering Design in Wood-Eighth Edition; Update No 1; Supplement 1- 2005;
Reprinted June 2005
|
CSA PLUS 1132
|
Building Materials and Products-General Instruction No 1
|
CSA PLUS 1132-
96
|
BREEAM - CANADA; an Environmental Performance Assessment for Existing Office
Buildings
|
CSA PLUS 1163
|
Chain of Custody for Forest Products Originating from a Defined Forest Area
Registered to CSA Standard CAN/CSA-Z809-First Edition
|
CSA S136.1- 95
|
Commentary on CSA Standard S136-94, Cold Formed Steel Structural Members-General
Instruction No 1
|
CSA S136- 01
|
North American Specification for the Design of Cold-Formed Steel Structural
Members-Sixth Edition; Update No 1; Update No 2; Supplement 1: 2004
|
CSA
S157-05/S157.1- 05
|
Strength design in aluminum/ Commentary on CSA S157-05, Strength design in
aluminum-Fourth Edition
|
CSA S16-01-
CAN/CSA
|
Limit States Design of Steel Structures-Sixth Edition; Reprinted 8/2005;
Incorporates Updates 1&2, Supplement 1
|
CSA S269.1-
1975
|
Falsework for Construction Purposes-General Instruction No 1
|
CSA
S269.2-M87- CAN/CSA
|
Access Scaffolding for Construction Purposes-Second Edition; General Instruction
No. 1
|
CSA
S269.3-M92- CAN/CSA
|
Concrete Formwork-First Edition; General Instruction No 1
|
CSA S304.1- 04
|
Design of masonry structures-Second Edition
|
CSA S307-
M1980
|
Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings-Second
Edition; General Instruction No 1-2
|
CSA S347- 99
|
Method of Test for Evaluation of Truss Plates Used in Lumber Joints-Third
Edition; General Instruction No. 1
|
CSA S350-
M1980
|
Code of Practice for Safety in Demolition of Structures-First Edition; General
Instruction No. 1
|
CSA S367-M81-
CAN3
|
Air-Supported Structures-First Edition; General Instruction No 1- 2
|
CSA S37- 01
|
Antennas, Towers, and Antenna-Supporting Structures-Sixth Edition; Update No 1
|
CSA S406-92-
CAN/CSA
|
Construction of Preserved Wood Foundations-General Instruction No 1; Second
Edition
|
CSA S413-94-
CAN/CSA
|
Parking Structures-Second Edition; General Instruction No 1- 2
|
CSA S448.1- 93
|
Repair of Reinforced Concrete in Buildings-General Instruction No 1- 2
|
CSA S471- 04
|
General requirements, design criteria, the environment, and loads-Third Edition;
Update No 1
|
CSA S472- 04
|
Foundations-Third Edition; Update No 1
|
CSA S473- 04
|
Steel structures-Third Edition; Update No 1
|
CSA S474- 04
|
Concrete Structures-Update No 1
|
CSA S475- 03
|
Sea Operations-Third Edition; Update No 1
|
CSA S478- 95
|
Guideline on Durability in Buildings-General Instruction No 1; First Edition
|
CSA S6.1- 00
|
Commentary on CSA Standard CAN/CSA-S6-00, Bridge Design Code
|
CSA S6-00-
CAN/CSA
|
Canadian Highway Bridge Design Code-Ninth Edition; General Instruction No 1
|
CSA S806- 02
|
Design and Construction of Building Components with Fibre-Reinforced
Polymers-First Edition; Update No 2-4
|
CSA S826
SERIES-01- CAN/CSA
|
Ferry Boarding Facilities-General Instruction No. 1; First Edition
|
CSA S832- 01
|
Guideline for Seismic Risk Reduction of Operational and Functional Components
(OFCs) of Buildings-First Edition; Update No. 1
|
CSA W117.2-01-
CAN/CSA
|
Safety in Welding, Cutting, and Allied Processes-Fourth Edition; General
Instruction No 1; Update No 2; Update No 3; Update No 4
|
CSA W178.1- 02
|
Certification of Welding Inspection Organizations-Fourth Edition
|
CSA W178.2- 01
|
Certification of Welding Inspectors-Fourth Edition
|
CSA W186-
M1990
|
Welding of Reinforcing Bars in Reinforced Concrete Construction- General
Instruction No 1
|
CSA W47.1- 03
|
Certification of Companies for Fusion Welding of Steel-Sixth Edition
|
CSA W47.2-
M1987
|
Certification of Companies for Fusion Welding of Aluminum-General Instruction No
1
|
CSA W48-01-
CAN/CSA
|
Filler Metals and Allied Materials for Metal Arc Welding-First Edition; General
Instruction No 1; Supersedes the Previous W48 Series of Standards Comprising
W48.1 to W48.6; Update No 2
|
CSA W55.3-
1965
|
Resistance Welding Qualification Code for Fabricators of Structural Members Used
in Buildings
|
CSA W59.2-
M1991
|
Welded Aluminum Construction-General Instruction No 1; Replaces CSA S244-1969
|
CSA W59- 03
|
Welded Steel Construction (Metal Arc Welding)-Eighth Edition; Update No. 1
|
CSA W59- M1989
|
Steel Fixed Offshore Structures Welded Steel Construction (Metal Arc
Welding)-General Instruction No 1; Supplement 1; 1989; General Instruction No 2
to Supplement 1; 1989
|
CSA Z240 MH
SERIES- 92
|
Mobile Homes-Second Edition; General Instruction No 1-3; Update No 4
|
CSA Z240 RV
SERIES- 99
|
Recreational Vehicles-Second Consolidated Edition
|
CSA Z240.10.1-
94
|
Site Preparation, Foundation, and Anchorage of Mobile Homes-Second Edition;
General Instruction No 1
|
CSA Z241
SERIES- 03
|
Park Model Trailers-Second Edition; Update No 1
|