|
AWS A1.1 |
Metric Practice Guide for the Welding Industry |
|
AWS A2.4 |
Standard Symbols for Welding, Brazing, and Nondestructive Examination |
|
AWS A2.4- SP |
Standard Symbols for Welding, Brazing and Nondestructive Examination-Spanish |
|
AWS A3.0 |
Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying |
|
AWS A4.2M/A4.2 |
Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal |
|
AWS A4.3 |
Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding |
|
AWS A4.4M |
Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings |
|
AWS A5.01 |
Filler Metal Procurement Guidelines |
|
AWS A5.1/A5.1M |
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding-Errata: 9/2004 |
|
AWS A5.10/A5.10M |
Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods |
|
AWS A5.11/A5.11M |
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding |
|
AWS A5.12/A5.12M |
Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting |
|
AWS A5.13 |
Specification for Surfacing Electrodes for Shielded Metal Arc Welding |
|
AWS A5.14/A5.14M |
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods |
|
AWS A5.15 |
Specification for Welding Electrodes and Rods for Cast Iron |
|
AWS A5.16/A5.16M |
Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods |
|
AWS A5.17/A5.17M |
Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding |
|
AWS A5.18/A5.18M |
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding |
|
AWS A5.19 |
Specification for Magnesium Alloy Welding Electrodes and Rods |
|
AWS A5.2 |
Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding |
|
AWS A5.20/A5.20M |
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding |
|
AWS A5.21 |
Specification for Bare Electrodes and Rods for Surfacing |
|
AWS A5.22 |
Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding |
|
AWS A5.23/A5.23M |
Specification for Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding |
|
AWS A5.24/A5.24M |
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods |
|
AWS A5.25/A5.25M |
Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding |
|
AWS A5.26/A5.26M |
Specification for Carbon and Low-Alloy Steel Electrodes and Electrogas Welding |
|
AWS A5.28/A5.28M |
Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding |
|
AWS A5.29/A5.29M |
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding |
|
AWS A5.3/A5.3M |
Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding |
|
AWS A5.30 |
Specification for Consumable Inserts |
|
AWS A5.31 |
Specification for Fluxes for Brazing and Braze Welding |
|
AWS A5.32/A5.32M |
Specification for Welding Shielding Gases |
|
AWS A5.4 |
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding-Supersedes SAE AMS 5777 |
|
AWS A5.5 |
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding |
|
AWS A5.6 |
Specification for Covered Copper and Copper Alloy Arc Welding Electrodes |
|
AWS A5.7 |
Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes-Errata:10/19/2004 |
|
AWS A5.8/A5.8M |
Specification for Filler Metals for Brazing and Braze Welding- Errata:2004 |
|
AWS A5.9 |
Specification for Bare Stainless Steel Welding Electrodes and Rods |
|
AWS A6.0 |
Safe Practices for Welding and Cutting Containers That Have Held Combustibles |
|
AWS A9.1 |
Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases |
|
AWS A9.2 |
Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases |
|
AWS API- IM |
Code Clinic for Study of API Standard 1104 Eighteenth Edition Welding of Pipelines and Related Facilities - Instruction Manual |
|
AWS API- M |
Code Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities - Reference Manual |
|
AWS ARE- 10 |
Monitoring and Control of Welding and Joining Processes |
|
AWS ARE- 11 |
Mechanized, Automated, and Robotic Welding |
|
AWS ARE- 12 |
Economics of Welding and Cutting |
|
AWS ARE- 4 |
Welding Metallurgy |
|
AWS ARE- 5 |
Design for Welding |
|
AWS ARE- 6 |
Test Methods for Evaluating Welded Joints |
|
AWS ARE- 7 |
Residual Stress and Distortion |
|
AWS ARE- 8 |
Symbols for Joining and Inspection |
|
AWS AWN |
Arc Welding and Cutting Noise |
|
AWS AWS FUMES AND GASES |
Contents |
|
AWS B1.10 |
Guide for the Nondestructive Examination of Welds |
|
AWS B1.11 |
Guide for the Visual Examination of Welds |
|
AWS B2.1 |
Specification for Welding Procedure and Performance Qualification |
|
AWS B2.1.001 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 3/4 Inch, in the As- Welded Condition, with Backing Site License |
|
AWS B2.1.002 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 7/8 Inch, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8- 006 |
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8 or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8- 010 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1, S-1 to M-8, P-8, or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8- 014 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8/P-8/S-8, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8- 227 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M- 8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER309(L), As-Welded Condition, Primarily Pipe Ap |
|
AWS B2.1-1/8- 228 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M- 8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, E309(L)-15, -16, or -17, As-Welded Condition, P |
|
AWS B2.1-1/8- 229 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/ S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/ P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER309(L) |
|
AWS B2.1-1/8- 230 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), |
|
AWS B2.1-1/8- 231 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8,Group 1),1/8 through 1-1 |
|
AWS B2.1-1- 003 |
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Galvanized Steel, (M-1), 18 Through 10 Gauage, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1- 004 |
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Carbon Steel, (M-1, Group 1), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1- 007 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Galvanized Steel,(M-1) 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1- 008 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, P-1 or S-1), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1- 011 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel(M-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License-Errata: 01/2005 |
|
AWS B2.1-1- 012 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1,P-1, or S-1 to M-1, P-1 or S-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1- 016 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1- 017 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1- 018 |
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition Site License |
|
AWS B2.1-1- 019 |
Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition Site License |
|
AWS B2.1-1- 020 |
Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1- 1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1- 021 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1- 022 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1- 026 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1- 027 |
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1/2 Inch Thick, E71T-11, As-Welded Condition Site License |
|
AWS B2.1-1- 201 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, (Primarily Pipe Applic |
|
AWS B2.1-1- 202 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition (Primarily Pipe Appli |
|
AWS B2.1-1- 203 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-1- 204 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition (Primarily Pipe App |
|
AWS B2.1-1- 205 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition (Primarily Pi |
|
AWS B2.1-1- 206 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition (Primarily |
|
AWS B2.1-1- 207 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-1- 208 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-1- 209 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pipe Ap |
|
AWS B2.1-1- 210 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1- 1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications Sit |
|
AWS B2.1-1- 211 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded |
|
AWS B2.1-22- 015 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M/P/S-22 TO M/P/S-22), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-4- 217 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applicatio |
|
AWS B2.1-4- 218 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applic |
|
AWS B2.1-4- 219 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Cond |
|
AWS B2.1-5A- 222 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications Site Lic |
|
AWS B2.1-5A- 223 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER9018-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications Sit |
|
AWS B2.1-5A- 224 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P- 5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, ER90S |
|
AWS B2.1-5A- 225 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, P |
|
AWS B2.1-5A- 226 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium- Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thi |
|
AWS B2.1-8- 005 |
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing-Errata:2004 |
|
AWS B2.1-8- 009 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8,P-8,or S-8), 18 Through 10 Gauge, in the As- Welded Condition, with or without Backing Site License |
|
AWS B2.1-8- 023 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition Site License |
|
AWS B2.1-8- 024 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition Primarily Plate and Structural Applications Site |
|
AWS B2.1-8- 025 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, E3XX-XX, As-Welded Condition, Primarily Plate and Struct |
|
AWS B2.1-8- 212 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications |
|
AWS B2.1-8- 213 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX-XX, As-Welded Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-8- 214 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX, E3XX-XX As-Welded Condition, Primarily Pipe Appli |
|
AWS B2.1-8- 215 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX and ER3XX, As-Welded Condition, (Primarily Pipe Applications) |
|
AWS B2.1-8- 216 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX, ER3XXX, and E3XX-XX, As-We |
|
AWS B2.2 |
Standard for Brazing Procedure and Performance Qualification |
|
AWS B4.0 |
Standard Methods for Mechanical Testing of Welds |
|
AWS B4.0M |
Standard Methods for Mechanical Testing of Welds |
|
AWS B5.1 |
Specification for the Qualification of Welding Inspectors |
|
AWS B5.15 |
Specification for the Qualification of Radiographic Interpreters |
|
AWS B5.16 |
Specification for the Qualification of Welding Engineers |
|
AWS B5.17 |
Specification for the Qualification of Welding Fabricators |
|
AWS B5.2 |
Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants |
|
AWS B5.4 |
Specification for the Qualification of Welder Test Facilities |
|
AWS B5.5 |
Specification for the Qualification of Welding Educators |
|
AWS B5.9 |
Specification for the Qualification of Welding Supervisors |
|
AWS BRH |
Brazing Handbook 1991 Fourth Edition |
|
AWS BRH APP A |
Definitions of Terms-Fourth Editioin |
|
AWS BRH CH 24 |
Stainless Steels-Fourth Edition |
|
AWS BRH CH 25 |
Aluminum and Aluminum Alloys-Fourth Edition |
|
AWS C1.1M/C1.1 |
Recommended Practices for Resistance Welding |
|
AWS C1.2 |
Recommended Practices for Spot Welding Aluminium and Aluminium Alloys |
|
AWS C1.3 |
Recommended Practices for Resistance Welding Coated Low Carbon Steels |
|
AWS C1.5 |
Specification for the Qualification of Resistance Welding Technician |
|
AWS C2.16/C2.16M |
Guide for Thermal-Spray Operator Qualification |
|
AWS C2.18 |
Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites-Errata:1993 |
|
AWS C2.23M/C2.23 |
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel-NACE 12, SSPC-CS 23.00 |
|
AWS C2.25/C2.25M |
Specification for Thermal Spray Feedstock Solid and Composite Wire and Ceramic Rods |
|
AWS C3.2M/C3.2 |
Standard Method for Evaluating the Strength of Brazed Joints- Errata 2001 |
|
AWS C3.3 |
Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components |
|
AWS C3.4 |
Specification for Torch Brazing |
|
AWS C3.5 |
Specification for Induction Brazing |
|
AWS C3.6 |
Specification for Furnace Brazing |
|
AWS C3.7M/C3.7 |
Specification for Aluminum Brazing |
|
AWS C3.8M/C3.8 |
SPECIFICATION FOR THE ULTRASONIC EXAMINATION OF BRAZED JOINTS |
|
AWS C4.3/C4.3M |
Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation |
|
AWS C4.4/C4.4M |
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches |
|
AWS C5.1 |
Recommended Practices for Plasma-Arc Welding |
|
AWS C5.10/C5.10M |
Recommended Practices for Shielding Gases for Welding and Cutting-Errata 2003: 04/27/2004 |
|
AWS C5.2 |
Recommended Practices for Plasma Arc Cutting and Gouging |
|
AWS C5.3 |
Recommended Practices for Air Carbon Arc Gouging and Cutting |
|
AWS C5.4 |
Recommended Practices for Stud Welding-ERRATA:1993 |
|
AWS C5.5/C5.5M |
Recommended Practices for Gas Tungsten Arc Welding |
|
AWS C5.6 |
Recommended Practices for Gas Metal Arc Welding |
|
AWS C6.1 |
Recommended Practices for Friction Welding |
|
AWS C7.1M/C7.1 |
Recommended Practices for Electron Beam Welding |
|
AWS C7.2 |
Recommended Practices for Laser Beam Welding, Cutting, and Drilling |
|
AWS C7.3 |
Process Specification for Electron Beam Welding |
|
AWS CC- IM |
Code Clinic for Study of AWS D1.1 Structural Welding code - Steel |
|
AWS CC- RM |
Code Clinic for Study of AWS D1.1 Structural Welding Code-Steel - Reference Manual-Second Printing October 2003 |
|
AWS CM ANNEX A |
Additional Resources |
|
AWS CM ANNEX B |
Sample Forms |
|
AWS CM ANNEX C |
Answer Key Review Questions Chapters 1 - 13 |
|
AWS CM CH 1 |
Welding Inspector |
|
AWS CM CH 11 |
Weld and Base Metal Discontinuities |
|
AWS CM CH 12 |
Nondestructive Examination (NDE) Processes |
|
AWS CM CH 2 |
Welding Inspector Responsibilities |
|
AWS CM CH 3 |
Safety |
|
AWS CM CH 4 |
Standards, Including Codes and Specifications |
|
AWS CM CH 5 |
Weld Geometry and Welding Terminology |
|
AWS CM CH 6 |
Welding and Nondestructive Examination Symbols |
|
AWS CM CH 7 |
Weldability, Welding Metallurgy, and Welding Chemistry |
|
AWS CM CH 8 |
Destructive Testing |
|
AWS CM CH 9 |
Welding, Procedure and Welder Qualification |
|
AWS CWSM |
CERTIFIED WELDING SUPERVISOR MANUAL FOR QUALITY AND PRODUCTIVITY IMPROVEMENT |
|
AWS D1.0 |
Welding in Building Construction-Eighth Edition; Supplement 2: September 1968 |
|
AWS D1.1- BI |
The Official Book of D1.1 Interpretations - a Collection of Responses to Formal Inquiries About the Requirements of AWS D1.1 (1976-1998) |
|
AWS D1.1/D1.1M |
Structural Welding Code - Steel - Jan 1, 2006 |
|
AWS D1.2/D1.2M |
Structural Welding Code Aluminum-Fourth Edition; Errata:2004 |
|
AWS D1.3 |
Structural Welding Code - Sheet Steel-Errata |
|
AWS D1.4/D1.4M |
Structural Welding Code - Reinforcing Steel-Errata 10/2005 |
|
AWS D1.5M/D1.5 |
Bridge Welding Code-AASHTO BWC-4; Errata:2002 |
|
AWS D1.6 |
Structural Welding Code - Stainless Steel |
|
AWS D10.10/D10.10M |
Recommended Practices for Local Heating of Welds in Piping and Tubing |
|
AWS D10.11 |
Recommended Practices for Root Pass Welding of Pipe without Backing |
|
AWS D10.12M/D10.12 |
Guide for Welding Mild Steel Pipe |
|
AWS D10.13/D10.13M |
Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems |
|
AWS D10.4 |
Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing |
|
AWS D10.6/D10.6M |
Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing |
|
AWS D10.7M/D10.7 |
Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe |
|
AWS D10.8 |
Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing |
|
AWS D11.2 |
Guide for Welding Iron Castings |
|
AWS D14.1/D14.1M |
Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment |
|
AWS D14.2 |
Specification for Metal Cutting Machine Tool Weldments |
|
AWS D14.3/D14.3M |
Specification for Welding Earthmoving, Construction, and Agricultural Equipment |
|
AWS D14.4/D14.4M |
Specification for Welded Joints in Machinery and Equipment- Third Edition |
|
AWS D14.5 |
Specification for Welding of Presses and Press Components |
|
AWS D14.6/D14.6M |
Specification for Welding of Rotating Elements of Equipment- 3rd Edition |
|
AWS D15.1 |
Railroad Welding Specification - Cars and Locomotives- Errata:2001 |
|
AWS D15.2 |
Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles-Errata: 07/2005 |
|
AWS D16.1M/D16.1 |
Specification for Robotic Arc Welding Safety |
|
AWS D16.4M/D16.4 |
Specification for the Qualification of Robotic Arc Welding Personnel-2nd Editon |
|
AWS D17.1 |
Specification for Fusion Welding for Aerospace Applications- Incorporating Errata - 07/2001 |
|
AWS D18.1 |
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications |
|
AWS D18.2 |
Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube |
|
AWS D18.3/D18.3M |
Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications |
|
AWS D3.5 |
Guide for Steel Hull Welding |
|
AWS D3.6M |
Specification for Underwater Welding |
|
AWS D3.7 |
Guide for Aluminum Hull Welding-Errata 6/15/2004 |
|
AWS D8.7M |
Recommended Practices for Automotive Weld Quality Resistance SpotWelding-Supersedes D8.7:1988 |
|
AWS D8.8 |
Specification for Automotive and Light Truck Components Weld Quality - Arc Welding-SAE HS J1196 |
|
AWS D8.9M |
Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials-SAE D8.9M- 2002 |
|
AWS D9.1M/D9.1 |
Sheet Metal Welding Code |
|
AWS DPW |
Design and Planning Manual for Cost-Effective Welding |
|
AWS EG2.0 |
Guide for The Training and Qualification of Welding Personnel Entry Level Welder |
|
AWS EG3.0 |
Guide for the Training and Qualification of Welding Personnel Level II - Advanced Welder |
|
AWS EG4.0 |
Guide for the Training and Qualification of Welding Personnel Level III - Expert Welder |
|
AWS F1.4 |
Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes |
|
AWS F2.1 |
Recommended Safe Practice for Electron Beam Welding and Cutting |
|
AWS F2.2 |
Lens Shade Selector |
|
AWS F3.2M/F3.2 |
Ventilation Guide for Weld Fume |
|
AWS F4.1 |
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping |
|
AWS FMC |
Filler Metal Comparison Charts |
|
AWS FWSH |
Design Handbook for Calculating Fillet Weld Sizes |
|
AWS G2.1M/G2.1 |
Guide for the Joining of Wrought Nickel-Based Alloys- Reprinted, Incorporates Errata: October 2003 |
|
AWS GTW |
Guide to Weldability Carbon and Low Alloy Steels |
|
AWS HOT |
Hands-On Training use of Measuring Tools for the AWS Certified Welding Inspector Hands-On Examination |
|
AWS IFS- 02 |
International Index of Welding Filler Metal Classifications |
|
AWS JWE |
Jefferson´s Welding Encyclopedia-Eighteenth Edition |
|
AWS PARW |
The Professional´s Advisor on Resistance Welding |
|
AWS PASS |
Professional´s Advisor on Welding Stainless Steels |
|
AWS PHB- 3 |
The Everyday Pocket Handbook on Welded Joint Details for Structural Applications |
|
AWS PHB- 6 |
The Everyday Pocket Handbook for Visual Inspection of AWS D1.1 Structural Welding Code´s Fabtication and Welding Requirements |
|
AWS PRG |
The Practical Reference Guide for Radiographic Inspection - Acceptance Criteria |
|
AWS PRGC |
The Practical Reference Guide for Corrosion of Welds - Causes and Cures |
|
AWS PRGHF |
The Practical Reference Guide for Hardfacing |
|
AWS PRGQA |
The Practical Reference Guide for Welding Aluminum High-Quality Fusion Welding |
|
AWS PRGT |
The Practical Reference Guide for Welding Titanium |
|
AWS PRGVT |
The Practical Reference Guide for Welding Inspection Management - Visual Inspection of Pressure Vessels and Pressure Piping |
|
AWS PRGWA |
The Practical Reference Guide for Welding Aluminum Commercial Applications |
|
AWS PRGWM |
The Practical Reference Guide to Welding Metallurgy - Key Concepts for Weldability |
|
AWS PWE |
The Practical Welding Engineer |
|
AWS QC1 |
Standard for AWS Certification of Welding Inspectors |
|
AWS QC- 10 |
Specification for Qualification and Registration of Level IEntry Welders |
|
AWS QC11 |
Specification for Qualification and Certification for Level II - Advanced Welders |
|
AWS QC7 |
Standard for AWS Certified Welders |
|
AWS SGSH |
The Independent Shop s Guide to Welding Safety and Health |
|
AWS SHB |
Soldering Handbook-Third Edition |
|
AWS SHB INTRO |
Soldering Handbook |
|
AWS TSM |
Thermal Spray Manual - A Practicle Reference Guide |
|
AWS TSS |
Thermal Spraying - Practice, Theory, and Application |
|
AWS UEAW |
Handbook on the Ultrasonic Examination of Austenitic Welds |
|
AWS UGFM |
AWS User´s Guide to Filler Metals |
|
AWS VIW- IM |
Visual Inspection Workshop Instructors Manual |
|
AWS VIW- M |
Visual Inspection Workshop Reference Manual |
|
AWS WCI |
Welding of Cast Iron - a Selection of Papers |
|
AWS WHB- 1 |
Welding Science and Technology Volume I-Ninth Edition |
|
AWS WHB-1 APP A |
Terms and Definitions |
|
AWS WHB-1 APP B |
Metric Practice Guide for the Welding Industry |
|
AWS WHB-1 CH 1 |
Survey of Joining, Cutting, and Allied Processes |
|
AWS WHB-1 CH 10 |
Monitoring and Control of Welding and Joining Process |
|
AWS WHB-1 CH 13 |
Weld Quality |
|
AWS WHB-1 CH 14 |
Welding Inspection and Nondestructive Examination |
|
AWS WHB-1 CH 15 |
Qualification and Certification |
|
AWS WHB-1 CH 16 |
Codes and Other Standards |
|
AWS WHB-1 CH 2 |
Physics of Welding and Cutting |
|
AWS WHB-1 CH 3 |
Heat Flow in Welding |
|
AWS WHB-1 CH 4 |
Welding Metallurgy |
|
AWS WHB-1 CH 5 |
Design for Welding |
|
AWS WHB-1 CH 6 |
Test Methods for Evaluating Welded Joints |
|
AWS WHB-1 CH 7 |
Residual Stress and Distortion |
|
AWS WHB-1 CH 9 |
Weldment Tooling and Positioning |
|
AWS WHB-1 HDBK |
Welding Science and Technology Volume I-Ninth Edition |
|
AWS WHB-2 HDBK |
Welding Handbook Volume 2 Welding Processes, Part 1-Ninth Edition |
|
AWS WHB-2.8 VOL 1 SPANISH |
Welding Handbook Volume 2 - Welding Processes - Spanish- Eighth Edition |
|
AWS WHB- 3 |
Materials and Applications - Part 1 |
|
AWS WHB-3 CH 1 |
Aluminum and Aluminum Alloys |
|
AWS WHB-3 CH 4 |
Nickel and Cobalt Alloys |
|
AWS WHB-3 HDBK |
Materials and Applications - Part 1 |
|
AWS WHB- 4 |
Metals and Their Weldability |
|
AWS WHB-4 CH 1 |
Carbon and Low Alloy Steels |
|
AWS WHB-4 CH 2 |
Stainless Steels |
|
AWS WHB-4 CH 6 |
Nickel and Cobalt Alloys |
|
AWS WHB-4 CH 8 |
Aluminum Alloys |
|
AWS WHB-4 HDBK |
Metals and Their Weldability |
|
AWS WHB-4 PART 2 CH 5 |
Stainless and Heat-Resisting Steels |
|
AWS WHB-4 PART 2 CH 6 |
Clad and Dissimilar Metals |
|
AWS WHB-4 PART 2 HDBK |
Materials and Applications - Part 2-Eighth Edition |
|
AWS WHB-4 PART 2 INDEX |
Welding Handbook Index of Major Subjects |
|
AWS WHB-5 CH 1 |
Design for Welding |
|
AWS WHB-5 CH 2 |
Symbols for Welding, Brazing, and Nondestructive Examination |
|
AWS WHB-5 HDBK |
Engineering, Costs, Quality, and Safety |
|
AWS WI |
Welding Inspection Handbook-Third Edition |
|
AWS WI CH 2 |
Symbols |
|
AWS WI CH 6 |
Quality Assurance |
|
AWS WI CH 8 |
Preheating and Postweld Heat Treating |
|
AWS WI TABLE OF CONTENTS |
Welding Inspection Handbook-Third Edition |
|
AWS WIT- T |
Welding Inspection Technology-Fourth Edition; Errata:2000 |
|
AWS WIT-W- 99 |
Welding Inspection Technology Wookbook-Third Edition |
|
AWS WJT- G |
Joint - Weld Terminology and Standard Welding Symbols Interpretation |
|
AWS WM 1.4 |
Welding Metallurgy Volume I, Fundamentals-Fourth Edition; Volume 1 |
|
AWS WPP |
Welding Processes and Practices |
|
AWS WQAG |
Welding Quality Assurance Guideline for Fabricators |
|
AWS WZC |
Welding Zinc-Coated Steel-First Edition |
|
AWS Z49.1 |
Safety in Welding, Cutting and Allied Processes |